Look it over before the first cold night

- Spread it out flat in good light. Look for scorch marks, brown spots, or areas that look melted or stiff.
- Feel along it for wires that bunch up, poke through, or have moved out of place.
- Check the cord and the controller. A cracked controller, a frayed or pinched cord, or a loose plug means it's done.
- Plug it in and turn it on for a bit while you're right there. Feel for hot spots that are much warmer than the rest.
- If it's very old and has no automatic shutoff timer, it's a good time to replace it.
Source: Stock photo by Limetolime on Wikimedia Commons, public domain. Not a Chris Can Fix It job photo.
Use it the right way
- Lay it flat on the bed. Don't tuck it in tight, fold it over, or bunch it up while it's on. Folds trap heat.
- Don't pile heavy blankets, pets, or bags on top of it while it's running.
- Keep the cord out from under the mattress and away from the bed frame so it doesn't get pinched.
- Plug it straight into a wall outlet, not a long extension cord or a power strip that's already loaded up.
- Turn it off when you get up, or use the timer. A lot of people warm the bed and switch it off before they fall asleep.
- Don't use one on a baby, a young child, or anyone who can't feel heat well or can't switch it off on their own. Don't use a heated pad and an electric blanket together.
Store it loosely rolled, not folded tight, in a bag on a shelf. Sharp folds and heavy boxes stacked on top are what break the wires inside over the summer.
When to stop and call
- Any burning smell, smoke, or a scorched spot means unplug it and throw it out. Don't try to repair a heated blanket.
- If the outlet it plugs into feels warm, sparks, or the plug fits loose, stop using that outlet. That's a job for a qualified electrician.
- Make sure the smoke alarms near the bedrooms work before the cold season starts.
If your heat isn't keeping the bedrooms comfortable and you're leaning on blankets to make up for it, call me at (470) 999-7395 or book online. A $79 diagnostic is how I track down why a room runs cold.


























































































