Why showers get weak

Tap water carries minerals. Every time the water dries on the showerhead, a little scale gets left behind. Over months it plugs the nozzles, so you get a few strong jets shooting sideways and a lot of weak ones, or just a trickle.
Source: Stock photo by Ivan Radic on Flickr, CC BY 2.0. Not a Chris Can Fix It job photo.
How I soak it
- Fill a plastic bag with plain white vinegar, enough to cover the face of the showerhead.
- Pull the bag up over the head and hold it on with a rubber band or twist tie.
- Let it soak for an hour, or overnight if the scale is heavy.
- Take the bag off, run the water hot for a minute, and rub the rubber nozzles with your finger or an old toothbrush to knock loose what's left.
- If the head unscrews easily by hand, you can take it off and soak it in a bowl instead.
Some fancy finishes, like brushed gold or oil-rubbed bronze, don't like a long vinegar soak. Check the maker's care guide first. If you use pliers to loosen the nut, wrap it in a rag so you don't scratch it.
When to call
Don't start taking the shower valve apart behind the handle. That's where small jobs turn into big ones. If the water is weak at every faucet in the house, only the hot side is weak, or you see water leaking at the shower arm or inside the wall, that needs a pro. Any water leak, call me the same day. Otherwise call me at (470) 999-7395 or book online for a $79 diagnostic.





















































































